Skip to main content

HW3 Problems

Total points 100
Published

November 18, 2026

Problem 1 (20 pts)

Consider a deformation map \[ \bsf{x} : B_{\rm{R}} \to B, \quad B_{\rm{R}} \subset \mbb{R}^{3}, B \subset \mbb{R}^{3} \] The components of \(\bsf{x}\) are \(x_{1}, x_{2}, x_{3} \in C^{\infty}(B_{\rm R})\). Assume \(B_{\rm{R}}\) is open and convex.

  1. Using Taylor’s theorem for multivariate functions, write out the linear expansion of the deformation map around a point \(\bsf{A} \in B_{\rm R}\) (and denote the remainder) in component form.

  2. In component form, rearrange the expansion and take an appropriate limit to obtain the components of the deformation gradient \(\bsf{F}\).

  3. In general, is the deformation gradient evaluated at a point \(\bsf{A} \in B_{\rm R}\) a relevant strain measure at another point \(\bsf{B} \in B_{\rm R}\) when \(\norm{\bsf{A} - \bsf{B}}\) is large?

  4. A homogeneous deformation is an affine deformation map of the form \[ \bsf{x}[\bsf{X}] = \bsf{F} \bsf{X} + \bsf{c} \] where the deformation gradient \(\bsf{F}\) is a constant function. Consider the Taylor expansion you wrote in part 1 and derive the form above for a homogeneous deformation. What happens to the remainder? What is the form of \(\bsf{c}\)?

  5. Consider question 3 again for a homogeneous deformation, does your answer remain the same?

Problem 2 (20 pts)

From Gonzalez and Stuart. A homogeneous deformation \(\bsf{x}[\bsf{X}]\) is called a translation if \[ \bsf{x}[\bsf{X}] = \bsf{X} + \bsf{c} \]

where \(\bsf{c} \in \mbb{R}^{3}\). A homogeneous deformation has a fixed point at \(\bsf{Y}\) if \[ \bsf{x}[\bsf{X}] = \bsf{Y} + \bsf{F}(\bsf{X} - \bsf{Y}) \]

  1. Why is the first deformation map called a translation and in what sense is \(\bsf{Y}\) a fixed point of the second deformation map?
  2. Prove the following result: Let \(\bsf{x}[\cdot]\) be a homogeneous deformation. Then given any point \(\bsf{Y}\), \(\bsf{x}[\cdot]\) can be decomposed as \[ \bsf{x}[\cdot] = \bsf{d}_{1}[\cdot] \circ \bsf{g}[\cdot] = \bsf{g}[\cdot] \circ \bsf{d}_{2}[\cdot] \] where \(\bsf{d}_{1}[\cdot], \bsf{d}_{2}[\cdot]\) are translations and \(\bsf{g}[\cdot]\) is a homogeneous deformation with a fixed point at \(\bsf{Y}\). Note, \(\bsf{F}\) is invertible.

Problem 3 (20 pts)

Given a deformation map \[ \begin{align} x_1[X_i] &= 3X_1+X_2^2, \\ x_2[X_i] &= X_1^2 - X_2^2+X_2, \\ x_3[X_i] &= X_3 \end{align} \]

  1. What is the deformation gradient at the point \(\bsf{X}_0\)?
  2. What is the right Cauchy-Green strain tensor at the point \(\bsf{X}_0\)?
  3. Find the stretch ratio, \(\lambda_1\), at the point \(\bsf{X}_0=(1,-1,0)\) in the direction of the material vector \(\bsf{N}_1=(0.001,0,0)\).
  4. Find the stretch ratio, \(\lambda_2\), at the point \(\bsf{X}_0=(1,-1,0)\) in the direction of the material vector \(\bsf{N}_2=(0,0.5,0)\).

Consider the material curves \(\bsf{\Gamma}_1[\xi]=\bsf{X}_0+\xi \bsf{N}_1\), \(\bsf{\Gamma}_2[\xi]=\bsf{X}_0+\xi \bsf{N}_2\), where \(\xi\in [0,1]\).

  1. What are the lengths of the curves \(\bsf{\Gamma}_1\) and \(\bsf{\Gamma}_2\)? We will refer to these lengths as \(L_1\) and \(L_2\).
  2. What is the length of the deformed curves corresponding to \(\bsf{\Gamma}_1\) and \(\bsf{\Gamma}_2\)? We will refer to these lengths as \(l_1\) and \(l_2\).
  3. Is it reasonable to approximate \(l_1\) as \(\lambda_1 L_1\)?
  4. Is it reasonable to approximate \(l_2\) as \(\lambda_2 L_2\)?
  5. What is the change in the angle between the curves \(\bsf{\Gamma}_1\) and \(\bsf{\Gamma}_2\) at \(\bsf{X}_0\)?

Problem 4 (20 pts)

From Gonzalez and Stuart. Consider a material point \(\bsf{X}_{0}\). Let \(C_{ij}\) be the components of the right Cauchy-Green strain tensor with respect to the canonical basis \(\bsf{E}_{i}\), and let \(\lambda_{\bsf{E}_i}\) be the stretch ratio in the direction of the material vectors \(\bsf{E}_{i}\). Show that at \(\bsf{X}_{0}\)

  1. \(C_{ii} = \lambda_{\bsf{E}_{i}}^2\) (no sum)
  2. \(C_{ij} = \lambda_{\bsf{E}_{i}} \lambda_{\bsf{E}_{j}} \sin[\Theta - \theta]\), \((i \neq j)\) where \(\Theta - \theta\) is the change in angle between two curves \(\bsf{\Gamma}_{i}\) and \(\bsf{\Gamma}_{j}\) at \(\xi_{0}\) and \(\rho_{0}\) such that \(\bsf{\Gamma}_{i}[\xi_{0}] = \bsf{X_{0}}\) and \(\bsf{\Gamma}_{j}[\rho_{0}] = \bsf{X_{0}}\), whose tangent vectors are the material vectors \(\bsf{E}_{i}\) and \(\bsf{E}_{j}\).

Problem 5 (20 pts)

From Gonzalez and Stuart. Let \(B = \set{\bsf{X} \in \mbb{R}^{3}}{0 < X_{i} < 1}\). Consider the deformation map \[ \begin{align} x_1[X_i] &= X_1 + \alpha X_2, \\ x_2[X_i] &= X_2, \\ x_3[X_i] &= X_3, \\ \alpha &> 0 \end{align} \] A deformation of this type is called simple shear in the \(\bsf{E}_{1}-\bsf{E}_{2}\) plane, where \(\bsf{E}_{1} = (1, 0, 0), \bsf{E}_{2} = (0, 1, 0), \bsf{E}_{3} = (0, 0, 1)\).

  1. Is this a homogeneous deformation?
  2. Find the components of the right Cauchy-Green strain tensor.
  3. Find the shear, i.e. the change in angle between the pairs of material vectors \(\bsf{E}_{1}, \bsf{E}_{2}\) and \(\bsf{E}_{1}, \bsf{E}_{3}\). What happens to the shears in the limits \(\alpha \to 0\) and \(\alpha \to \infty\)?
  4. In the direction(s) of what material vector(s) \(\bsf{N}\) is the stretch ratio \(\lambda\) an stationary value? (The stationary values of stretch ratio are called the principal stretches).